Apple makes macOS Catalina available through the Mac App Store. The download will be several gigabytes in size, and the installation will take several minutes, so use a reliable internet connection. Jul 29, 2020 macOS 10.15 (Catalina) - Compatibility with Native Instruments Products After having conducted systematic tests, Native Instruments confirms full macOS Catalina compatibility with the latest versions of all current products. IMPORTANT NOTE: macOS 10.15 terminates the operability of some NI legacy hardware.
NOTE:
Screenflow 9 0 2 download free. Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites
Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the built in smart card ability (very bottom of macuninstall link above)
If you purchased your Mac with OS Catalina (10.15.x) already installed, you can skip the uninstall part above and follow the instructions below.
6 'high level' steps needed, follow down the page to make this a painless systematic process
| 1. | Is your CAC reader 'Mac friendly'? |
| 2. | Can your Mac 'see' the reader? |
| 3. | Verify which version of Mac OS you have |
| 4. | Figure out which CAC (ID card) you have |
| 5. | Install the DoD certificates |
| 5a. | Additional DoD certificate installation instructions for Firefox users |
| 6. | Decide which CAC enabler you want to use (except for 10.12-.15 & 11) |
Step 1: Is your CAC reader Mac friendly?
Visit the USB Readers page to verify the CAC reader you have is Mac friendly.
Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.
'Some, not all' CAC readers may need to have a driver installed to make it work.
NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).
Information about these specific readers are in Step 2
Step 2: Can your Mac 'see' the reader?
Plug the CAC reader into an open USB port before proceeding, give it a few moments to install
Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'
Step 2b: Click 'System Report.' (button)
Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.
Step 2c1: Verify firmware version on your SCR-331 or GSR-202, 202V, 203 CAC, or SCR-3500a reader. If you have a reader other than these 5, Proceed directly to step 3
Step 2c1a-SCR-331 reader
If your reader does not look like this, go to the next step.
In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.
Step 2c1b-SCR-3500A reader
If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open
Step 3: Verify which version of MacOS do you have?
(You need to know this information for step 6)
Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'
Step 3b: Look below Mac OS X for: Example: Version 10.X.X.
Step 4: Figure out which CAC (ID Card) you have
(You need to know this information for step 6)
Look at the top back of your ID card for these card types. If you have any version other than the six shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.
Find out how to flip card over video
Step 5: Install the DoD certificates (for Safari and Chrome Users)
Go to Keychain Access
Click: Go (top of screen), Utilities, double click Keychain Access.app
(You can also type: keychain access using Spotlight (this is my preferred method))
Select login (under Keychains),and All Items (under Category).
Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As. on each link) Save to your downloads folder
Please know. IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.
https://militarycac.com/maccerts/AllCerts.p7b,
https://militarycac.com/maccerts/RootCert2.cer,
https://militarycac.com/maccerts/RootCert3.cer,
https://militarycac.com/maccerts/RootCert4.cer, and
Mac os x productivity apps. Double click each of the files to install certificates into the login section of keychain
Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:
DOD EMAIL CA-33 through DOD EMAIL CA-34,
DOD EMAIL CA-39 through DOD EMAIL CA-44,
DOD EMAIL CA-49 through DOD EMAIL CA-52,
DOD EMAIL CA-59,
Alexa app for mac air. DOD ID CA-33 through DOD ID CA-34,
DOD ID CA-39 through DOD ID CA-44,
DOD ID CA-49 through DOD ID CA-52,
DOD ID CA-59
DOD ID SW CA-35 through DOD ID SW CA-38,
DOD ID SW CA-45 through DOD ID SW CA-48,
DoD Root CA 2 through DoD Root CA 5,
DOD SW CA-53 through DOD SW CA-58, and
DOD SW CA-60 through DOD SW CA-61
NOTE: If you are missing any of the above certificates, you have 2 choices,
1. Delete all of them, and re-run the 5 files above, or
2. Download the allcerts.zip file and install each of the certificates you are missing individually.
Errors:
Error 100001 Solution
Error 100013 Solution
You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates
You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates
Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.
You may be prompted to enter computer password when you close the window
Once you select Always Trust, your icon will have a light blue circle with a white + on it.
The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.
The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x
| or | DoD Interoperability Root CA 1 or CA 2 | certificate | |
| DoD Root CA 2 or 3 (light blue frame ONLY) | certificate | ||
| or | Federal Bridge CA 2016 or 2013 | certificate | |
| or | Federal Common Policy CA | certificate | |
| or | or | SHA-1 Federal Root CA G2 | certificate |
| or | US DoD CCEB Interoperability Root CA 1 | certificate |
If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding
Clearing the keychain (opens a new page)
Please come back to this page to continue installation instructions.
Step 5a: DoD certificate installation instructions for Firefox users
NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability
Download AllCerts.zip, [remember where you save it].
double click the allcerts.zip file (it'll automatically extract into a new folder)
Option 1 to install the certificates (semi automated):
From inside the AllCerts extracted folder, select all of the certificates
<control> click (or Right click) the selected certificates, select Open With, Other.
In the Enable (selection box), change to All Applications
Select Firefox, then Open
You will see several dozen browser tabs open up, let it open as many as it wants.
You will eventually start seeing either of the 2 messages shown next
If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'
Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers
or
'Alert This certificate is already installed as a certificate authority.' Click OK
Once you've added all of the certificates.
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it
Option 2 to install the certificates (very tedious manual):
Click Firefox (word) (upper left of your screen)
Preferences
Advanced (tab on left side of screen)
Certificates (tab)
View Certificates (button)
Authorities (tab)
Import (button)
Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.
Note: You have to do this step for every single certificate
Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK
Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'
Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers
Once you've added all of the certificates.
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it
Step 6: Decide which CAC enabler you can / want to use
Only for Mac El Capitan (10.11.x or older)
After installing the CAC enabler, restart the computer and go to a CAC enabled website
NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x) or Catalina (10.15.x) computers no longer need a CAC Enabler.
Try to access the CAC enabled site you need to access now
Mac support provided by: Michael Danberry
After the official release of macOS Catalina, millions of Mac users have downloaded this system. However, this updated operating system of Apple comes with its own major or minor glitches. And the biggest toll it takes on speed. But no worries! We have come up with some solutions and tips to speed up your Mac running macOS Catalina.
Quick Links: https://gransiovaval1980.mystrikingly.com/blog/mac-os-x-64-bit-iso.
In this post, we will reveal 10 tips that helped many Mac users to speed up macOS Catalina. So if you want to speed up your Mac running on macOS Catalina, simply follow these tips right away!
This is the most common issue that every user faces while using Mac or any operating system’s laptop or computer. Many of you reading this might not be aware of stopping the applications that get launched right when your Mac starts.
So to speed up your Mac operating system, you need to stop the unnecessary applications that launch when the system starts. Here’s how you can close the applications on Mac that launch on startup.
Step #1. Click on the Apple () logo and select System Preferences. Once done, select the Users & Groups option.
Step #2. Now, select the User account and click on Login Items tab in it.
Step #3.Check the box of those items that you want to stop running during startup and click the ‘-‘ button at the bottom of the window. Quit System Preferences and you’re all good to go now.
That’s how simple it is to speed up the process of macOS Catalina by shutting down those applications that get launched during startup. Most of the problems are solved with this trick itself. But if you’re still facing the issue, you can refer to other tips on this list!
This is yet another common reason why users face Mac is running slow issues. We all know that Mac’s hard drive gets filled quickly due to space issues, and with these, the temporary and junk files eat up even more space. To clean up Mac drive means optimizing the drive, which macOS Catalina can do it automatically. Here’s how to do it.
Step #1. Click on the Apple () menu from the top left corner of your screen and click on About This Mac.
Step #2. Now select Storage and click on the Manage option from the right.
Step #3. Next, click on Optimize from Optimize Storage section. This will now remove all the old files which you haven’t used for a while.
Other options in the list are Store in iCloud, and you can use that as well to store everything in iCloud so that it can free up some space on your Mac. And the reduce clutter option works like charm as it reviews the files that are of no use for you. This way, you can clean up Mac’s drive with ease.
The junk files or the temporary files are the most useless files that eat up space, and moreover, they slow down the macOS Catalina process on your MacBook. These junk files also include the cache, which even slows down your system. So here’s how to remove it.
Step #1. First off, open Finder.
Step #2. Then head over to Go option from the top menu and click on Go to Folder.
Step #3. Now type ~/library/caches/in the folder box and click on Go or press Enter. This will open a window of all junk files, simply select all files and Move to Bin in Folder settings. That’s it! It will delete all the junk files.
Make sure that no process is stopped or no application has stopped working. If everything works fine, empty the bin to clean up those cache files forever! You can also try some of the Mac cleaner apps if you want to automate the process.
If you’re still unable to solve macOS Catalina is running slow issue, then you must try to disable apps that are using more power, and you aren’t using those apps. There are a lot of such apps that aren’t used by you but running in the background and eating up the maximum power and CPU or RAM as well.
Such apps have to be force quit to speed up the system. The same works with Windows OS users as well. So here’s how to disable apps that use more power on your macOS Catalina.
Step #1. Launch Finder and click on Applications.
Step #2. Next click Utilities. Now, double click on the Activity Monitor option to open the list of applications.
Step #3. Select any application and click on ‘X’from the top left corner of the screen.
If it still doesn’t work, simply tap on Force Quit.
You can check the apps that use more power, CPU, memory, network speed, etc. Best sculpting software 2018. and disable the apps which you feel are slowing down your Mac.
If you have already updated your Mac to the latest version of macOS Catalina, you might have already witnessed a significant change in the system concerning the brightness and transparency. These display features such as transparency and motion eat up a lot of memory and speed of the OS, leaving less space for the system to operate.
So you need to reduce the motion and transparency both to speed up your macOS Catalina system.
Step #1. Launch System Preferences and click on Accessibility.
Step #2. Now, go to the Display option and then check the boxes that are next to Reduce Motion and Reduce Transparency both.
Of course, this might not show a major impact, but every single thing matters when your Mac is slowing down. To be honest, I wouldn’t disable it as it’s one of the best features of macOS Catalina I have experienced till now!
If you’re unsure whether your Mac is compatible with macOS Catalina or not, you must check this as your first task in the process of speeding up your Mac. The Macs that were built before 2012 or even some of them before 2013 are not compatible with macOS Catalina.
Of course, they might run the OS completely, but it might not work well, and you might face unusual issues on your Mac. Here’s the list of complete devices that are compatible with macOS Catalina. A few of them which are to be noted are listed below.
Where is the store on xbox one. So if you’re using any other Mac, which is older than these models, you need to switch back to macOS Mojave to get your system working right!
Using safe mode fixes a lot of above-given problems like stopping startup applications, fixing any startup problems or errors, fixing any system errors, and a lot more!
To turn on the safe mode on your Mac, start up your Mac and hold on the shift key. Hold on until you see the login window or the desktop on your Mac. This will now put your Mac into the safe mode, and you can see the same on the top right corner of the Mac if you’ve entered the safe mode.
This can fix a lot of issues as it doesn’t boot the Mac normally and gets directly into the safe mode.
The modern Macs are designed in such a way that they can run without shutting it down completely, and this is possible because of the low power sleep mode, which doesn’t eat up power.
But little did you know that when you shut down the Mac completely, and restart, it wipes all the temporary files and clears up the RAM and this indirectly boosts your macOS Catalina speed. So make sure that you shut down your Mac at regular intervals.
Updating your apps regularly keeps the macOS Catalina running smoothly. Sometimes, the outdated apps aren’t supported by the latest OS systems. So you need to keep your Mac apps updated regularly and always have an eye if the system is running too slow.
If there isn’t any option or tip from the above list working to speed up macOS Catalina, the final option is to add more RAM to your Mac. Sometimes, it’s not the software that causes the slowdown, but many times, there are hardware issues as well.
In case your Mac has slots to add extra RAM and if you can afford it, see it as a worthy investment rather than taking it as an expense. This is because it will eventually speed up your macOS Catalina, and you’ll be productive, resulting in accomplishing more work.
Never fall for the apps or devices that claim they can speed up your Mac. Most of them are either scams or the virus that may even ruin your system completely. So simply upgrade your Macs RAM and enjoy the speedy system later on!
That’s it for today, folks!
So these were some of the tips that will surely help you in speeding up your Mac that’s running on macOS Catalina. We hope that these tips are already working for you, isn’t it? If not, let us know the issues you’re facing in the comment section below, and we will get back to you with the best possible solution on a quick note!
Related Posts on Mac You Might Like!
Suraj is a digital marketing expert on the iGB's team. He contributes to the social media section along with tips and tricks for iPhone, Apple Watch. Apart from blogging, he likes to work out as much as he can in his gym and love to listening to retro music.
0 
Star